Delivery: Juki MB1373- Curbside delivery by freight. 

Freight Charges Apply: After your purchase we will contact you with the amount. Please select PENDING FREIGHT CHARGES upon check out. 

For additional information we recommend you look at the brochure below this section and the features tab. 

The post Juki MB-1373 Single Thread Chain Button Sewing Industrial Machine Includes Table and Servo Motor appeared first on Juki Junkies.

• Application: Extra Heavy-Weight
• Max. Sewing Speed: 2,000 Stitches per Minute
• Max. Stitch Length: 10mm (forward/backward)
• Needle Bar Stroke: 38mm
• Lift of the Presser Foot by Knee: 16mm
• Alternating Vertical Movement: 2.5~6.5mm
• Thread: #20～#1, B69～B207, Nm=40/3～8/3
• Thread Take-Up: Slide Type
• Needle (at the time of delivery): Standard 190R or 135×17(Nm180) Nm125~Nm200
• Locus Feed: Complete Rectangular Feed
• Lubrication: Centralized oil wick lubrication (hook: automatic)
• Lubrication Oil: Juki New Defrix Oil No.2 (equivalent to ISO VG32)
• Distance from needle to machine arm: 255mm
• Bed Size: 517mm x 178mm
• Weight of the Machine Head: 44.5kg

Table included: Size 47″ x 21″ Table comes assembled

Included: Light, Knee Raise, Bobbin Winder, Pack of Needles, bobbin, thread stand

We recommend the servo motor speed control; it’s easier to use for those that don’t require the high speed stitching. 

Recommended for:  Bag makers, leather work, upholstery, sheaths and more!

Materials: leather

This product is sold as a complete unit. It comes delivered on a palette with the table assembled and the machine in a box. 

All you have to do is add the belt to the motor, assemble spool holder and tension dials.  Additionally,  machine needs to be dropped into table with safety clips.

Returns: Due to the delivery and size of the machine returns are not accepted. 

Variations: Due to the nature of industrial sewing machines table colors may vary.

Disclaimer: Industrial machines are tough, but due to their weight there may be some minor scratches on the head or the table during shipping. This is normal when shipping industrial sewing machines.

Delivery : Curbside delivery by freight. The table comes assembled on a palette and the machine in a box.

Freight Charges Apply: After your purchase we will contact you with the amount. Please select PENDING FREIGHT CHARGES upon check out. 

For additional information we recommend you look at the brochure below this section and the features tab. 

Supplies for this machine:
The oil that’s used for this machine is available here.

Optional Accessories here

The post JUKI LU-1508NH Extra Heavy Duty appeared first on Juki Junkies.

Problems which are associated with low-tension sewing such as “double-catching” and “irregular stitches”, as well as factors which affect seam quality such as “thread path”, “thread bending resistance”, “feed locus”, “needle locus” and “timing” have been thoroughly reviewed, thereby successfully producing soft seams. The machine has adopted JUKI’s established genuine hook and thread take-up lever.

The post JUKI LZ-2280 Industrial Zig-Zag Sewing Machine appeared first on Juki Junkies.

1-Needle Lockstitch 8mm Zigzag Large Hook Industrial Sewing Machine Comes With Table, Legs, Servo Motor, and LED Lamp

The machine tenses thread uniformly over the zigzag stroke to produce beautifully finished stitches at a high speed. With its extended zigzag width, higher presser foot lift, and newly introduced horizontal-axis double-capacity hook, the machine upgrades the functions required for the sewing of heavy materials. Equipped to handle a wider range of thread counts, the machine also delivers improved abilities for the sewing of decorative stitches and overedging. In addition, the AC servo motor/controller for the model with the automatic thread trimmer has been fully reconfigured to provide higher motor power and quicker actuation, thereby ensuring smooth operation.

The post Juki LZH-1290 appeared first on Juki Junkies.

Direct-drive, high-speed, sewing system with automatic thread trimmer

Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience.

Now, with JUKI’s digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn.

Vertically- and horizontally-driven digital feed mechanism

Thanks to the world’s first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease according to the material fabric of product to be sewn, thereby improving seam quality. Thanks to this digital feed mechanism, thread trimming is carried out with the feed dog lowered in the case the shorter-thread remaining thread trimming function is enabled.

As a result, the clearance provided between the throat plate and the material is eliminated, thereby stabilizing the length of thread remaining after thread trimming.

The feed dog does not protrude the top surface of throat plate when the sewing machine stops with its needle bar up, thereby facilitating placement/removal of the material on/from the top surface of throat plate and preventing the material from being damaged by the feed dog.

Various kinds of feed locus can be selected.

Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn.

Digital functions which accentuate excellent “seam” quality

Ⅰ. Adoption of the needle-thread active tension – Needle tension is digitally controlled

Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this the DDL-900C, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Example: Needle-thread active tension demonstrates its effectiveness in the topstitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.

Ⅱ. Active presser foot pressure mechanism – The presser foot pressure is digitally controlled

The DDL-9000C has a digital control system that controls the presser foot pressure. Under the automatic mode, the multi-layered section detection function detects changes in material thickness to increase/decrease the presser foot pressure accordingly. Under the manual mode, the presser foot pressure control function is assigned to the hand switch to enable operation with the hand switch.

Ⅲ. Needle thread clamp

The device clamps the needle thread and draws it under the material at the beginning of sewing. The needle thread clamp device works to reduce the size of thread tangling in on the wrong side of the material. This expands the area around the needle entry, thereby allowing the use of various gauge components.

Management of sewing performance and the DDL-9000C sewing machine by the utilization of IoT (Internet of Things)

Management, browsing and editing of data can be carried out on the application software

Data on the DDL-9000C sewing machine adjustments made according to the product to be sewn can be transferred to a commercially-available Android tablet in contactless mode. This enables quick check for uniform settings as well as confirmation of conditions of sewing machines in a sewing line, thereby facilitating setup changes.

The operation panel is also provided as standard with a USB port. Data management and software update can be carried out with ease using a USB thumb drive. Data items of sewing can be numerically managed to ensure “stable quality” and “reduction in time required for setup changes”. Quantified sewing data can be externally taken from the sewing machine using an Android tablet or USB thumb drive.

LED Light on the DDL-9000C

The LED light illuminates the needle entry area in the just-under direction from the right and left sides of the needle bar. In comparison with the single-direction illumination, this LED light helps the operator carry out sewing more easily. Illuminance of the LED light is adjustable in five levels. It can also be used as an auxiliary lamp for working.

＊”sti/min” stands for “Stitches per Minute.”
＊1 Stitch length of 4.00 mm or less: 5,000 sti/min; Stitch length of 4,05 – 5.00 mm: 4,000 sti/min
＊2 Stitch length of 4.00 or less: 4,500sti/min; Stitch length of 4.05 – 5.00mm: 4,000sti/min
＊3 Differs on a destination-by-destination basis

The walking foot, Bobbins, Bobbin Case, throat plate, and needles of the Juki TL models are NOT compatible with the Juki DDL-9000C, but the rest of the feet and accessories are.

Please see list of compatible items below:

Feet: 

Bag Makers Recommendation for Vinyls: https://jukijunkies.com/product/smooth-foot/

Needles:

https://jukijunkies.com/product/juki-dbx110x18-needles/

https://jukijunkies.com/product/juki-dbx110x14-needles/

Bobbins :

https://jukijunkies.com/product/juki-bobbin-22964001-5-pk/

In this LINK: https://jukijunkies.com/wp-content/uploads/machine-pdfs/catalogs/DDL9000C_catalog.pdf you will see a chart with SPECIFICATIONS ON the bottom right. Get to know this. This chart is on this page too. 

**ALL INDUSTRIALS ARE NON RETURNABLE**

The post JUKI DDL-9000C Series Industrial Machine appeared first on Juki Junkies.

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle, the compound feed machine supports the sewing of extra heavy materials. The walking foot machine comes with an extra-large steel handwheel with a diameter as large as φ175.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering

The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering.

The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches

The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes.

Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches.

The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality

With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors.

With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot

The high, 16mm foot lift enables easy material handling.

The machine comes with a dual-tension mechanism

The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.

The highly efficient vertical-axis double-capacity hook is equipped as standard

With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.

Improved operability

The stitch length can be easily selected by the stitch dial.

The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160).

A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)

The machine is a full-open-type top design that makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head.

The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

The post Juki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine appeared first on Juki Junkies.

Product Features:

• Needle thread clamping device

  The needle thread device is standard equipment. As a result, the needle thread at the start of sewing does not come out on the cloth, so the start of sewing beautiful finished seams. Operators use scissors less often and can prevent damage to the material caused by thread picking.

• Increased productivity by improved operability

  The machine achieves a longer distance from machine arm to needle by adopting a high long arm. This means the machine dramatically increases workability when sewing large products such as sofas and car seats.

• The direct drive system and the operation panel

  The sewing machine has been integrated with the control box and the operation panel for ease of use. The direct-drive motor system has been adopted by all of the sewing machine. This sewing machine is provided with a high-torque direct-drive motor that supports heavy-weight materials. Thanks to this motor, the sewing machine achieves excellent responsiveness and maintains strong material-penetrating power even when sewing multi-layered parts of material.

• LED Light

  The LED light is located on the underside of the arm jaw. It reduces operator fatigue and improves work efficiency. It is provided as standard for all models of the NA-11 Series.

• Feeding mechanism

  The machine’s powerful top & bottom feed demonstrates its performance when sewing leather and heavy fabric. The lift of the presser foot is as high as 16 mm, which responds to the sewing of bucky materials.

• Horizontal-axis full-rotary double-capacity hook

  The adoption of the horizontal-axis double-capacity hook helps reduce the frequency of bobbin thread replacement, thereby promising sewing work with efficiency. This hook is also helpful not only when sewing with thick thread but also when sewing a long seam length.

• Mechanism of automatic thread trimmer (NA-11UT)

  The automatic thread trimmer achieves consistent thread trimming regardless of thickness of the thread, i.e., from thin to thick thread. The machine has adopted the rotary thread trimming mechanism which matches, in particular, design stitch with thick thread for furniture and bags. The automatic thread trimmer improves workability and increases productivity. When compared with the sewing machine without a thread trimmer, the NA-11UT substantially decreases the consumption of thread. The knife pressure can be adjusted with the adjusting screw.

The post JIN NA-11/NA-11UT Direct-drive, 1-needle, Top and Bottom-feed, Lockstitch Machine with Double-capacity Hook appeared first on Juki Junkies.

3-Needle Coverstitch Industrial Sewing Machine Comes With Table, Legs, Servo Motor and LED Lamp

This Juki 3 Needle Coverstitch machine is perfect for hemming of sleeves and bottoms of t-shirts and the covering stitches for sportswear and knitwear. However, it is not a specific-purpose model, but can be used for a broad range of processes independently.  This machine includes a table, pedal, lamp and a high quality adjustable servo motor.

Recommended for:  Apparel

Returns: Due to the delivery and size of the machine returns are not accepted. 

Variations: Due to the nature of industrial sewing machines table colors may vary.

Disclaimer: Industrial machines are tough, but due to their weight there may be some minor scratches on the head or the table during shipping. This is normal when shipping industrial sewing machines.

Delivery: Juki MF7523 Curbside delivery by freight. The table and machine come assembled on a palette ready to sew. 

Freight Charges Apply: After your purchase we will contact you with the amount. Please select PENDING FREIGHT CHARGES upon check out. 

For additional information we recommend you look at the brochure below this section and the features tab. 

The post Juki MF7523 3-Needle Coverstitch Industrial Sewing Machine appeared first on Juki Junkies.

The Juki LU-1560N unique feed mechanism promises excellent efficiency of feed. In addition to the standard models of 2-needle machines, other models intended for special purposes are available, one having a thread trimmer. The machine is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity.

The higher lift of the presser foot lifts up to 16mm by knee and 9mm by hand making ideal for heavy layers of material. The machine delivers increased productivity at a sewing speed as high as 2,500 Stitches per minute  with a throat space of 517mm×178mm.

This machine has the option of a needle positioner and/or casters for an additional fee. Please select option when adding product to cart.

Freight Charges Apply: After your purchase we will contact you with the final amount. Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. DELIVERIES to Hawaii are suggested unassembled.

Improved Provability for the Juki LU-1650N

• The stitch length can be easily selected by the stitch dial.
• The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160).
• A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)
• The machine is full-open-type top design makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head.
• The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

The area around the needle entry is designed to be easily observed
(LU-1560N-7, LU-1561N-7)

Since the needle thread tension-release solenoid is fitted on the rear face of the machine head, the area around the needle entry and one-touch type reverse feed button is easily viewable. This substantially contributes to improved operability.

The walking foot and presser foot’s alternating vertical movement can be set and changed with ease
(LU-1560N-7, LU-1561N-7)

• The vertical strokes of the presser foot and walking foot (their alternating vertical movement) can be easily changed using a large dial mounted on the top surface of the machine head.
• In addition the sewing speed is automatically adjusted with the set value. With this feature, ideal sewing conditions are maintained at all times.
• The machine is equipped with an instantaneous changeover device for alternating the vertical movement amount of the walking foot and presser foot, which demonstrates its capability for processes involving sewing products with a lot of multi-layered portions.

A helpful automatic reverse feed function is provided as standard
(LU-1560N-7, LU-1561N-7)

• With just a light press on the one-touch type reverse feed button, reverse feed stitching is actuated. Furthermore if a suspended ruler is attached on the machine or a 3-dimensional sewing product is sewn, the button can be shifted upward to prevent interruption.
• The auto-lifter (pedal switch type) helps to increase efficiency by reducing operator fatigue.

Thread trimming without fail
(LU-1560N-7, LU-1561N-7)

The machine leaves a shorter needle thread after thread trimming, improving thread consumption efficiency. With a rigid knife and improved cam shape, the thread trimmer cuts thread as thick as #5 without fail.

• Bottom-feed micro-adjustment mechanism is provided as standard
  (LU-1510N-7, LU-1511N-7)

  The 1-needle type machine is equipped with a bottom-feed micro-adjustment mechanism with the needle feed amount fixed. This helps prevent irregular stitches which are free from pitch errors.

The post Juki LU-1560N Double Needle Unison Feed Walking Foot Industrial Sewing Machine and Servo Motor appeared first on Juki Junkies.

JUKI Simple Series sewing machine LK-1900S has been designed to have simplified and narrowed down capabilities that are essentially required to produce JUKI’s established seam quality. In addition, it supports the operator with the voice guidance system to improve work efficiency.

Juki’s quality is achieved by simple functions:

Higher Productivity

This sewing machine shortens the total cycle time with its improved capabilities such as the maximum sewing speed of 3,200 sti/min, quick acceleration at the beginning of sewing and quick deceleration at the end of sewing, increased thread trimming speed and work clamp foot lifting speed.

This sewing machine quickly carries out sewing of various kinds of sewing patterns

The sewing machine is provided as standard with 51 sewing patterns with different stitch directions and number of stitches, such as large bartacking, small bartacking, straight line tacking. The operator can select the best-suited sewing pattern according to the given process. (In some cases, the work clamp foot and other parts may be required to be changed.

The sewing machine provides the sewing area of 30mm(length) × 40mm(width).

With its large sewing area, this sewing machine can be fully utilized for sewing various kinds of sewing patterns such as lengthwise bartacking. In addition, the sewing machine has such a large memory capacity to store many different scale ratios, numbers of stitches and numbers of sewing patterns, thereby ensuring improved flexibility.

Feed control systems

●The LK-1900S comes in two different types; i.e., S type (Standard) and H type (for Heavy-weight materials). Customers may select one of these types according to their applications.

●The sewing machine has adopted a sufficient-in-power 550-W motor. With this motor, the sewing machine allows the needle to penetrate into heavy-weight materials smoothly.

●Bartacking data contained in a pattern number can be changed with ease by means of the pattern enlargement / reduction function. This operation can be done by entering the scale ratio through the operation panel.

●Standard sewing patterns can be registered to the pattern keys P1 to P50. In addition, the registered patterns P1 through P25 can be called up by a touch of the corresponding pattern key. It is advised to register 25 sewing patterns you use frequently to the pattern keys P1 to P 25 in order to improve workability.

●The operation panel is provided as standard with a USB port. This means that the sewing machine data management and software updating can be carried out with ease by means of the USB port.

This sewing machine is provided as standard with the voice-guidance system with clock function. This voice guidance can be used for the purpose of production support such as giving the operator information about the number of pieces produced, work progress management and the operation rate of sewing machine, though the initial setting is required.

——–Table included:

Included:

FOR MORE DETAILED INFORMATION please click on this LINK

Recommended for:  Apparel,

Returns: Due to the delivery and size of the machine returns are not accepted. 

Variations: Due to the nature of industrial sewing machines table colors may vary.

Disclaimer: Industrial machines are tough, but due to their weight there may be some minor scratches on the head or the table during shipping. This is normal when shipping industrial sewing machines.

Delivery: Juki LK1900S Curbside delivery by freight. The table and machine come assembled on a palette ready to sew. 

Freight Charges Apply: After your purchase we will contact you with the amount. Please select PENDING FREIGHT CHARGES upon check out. 

For additional information we recommend you look at the brochure below this section and the features tab. 

The post Juki LK1900S Computer-controlled, High-speed, Bartacking Machine/LK-1900S-SS/LK-1900S-HS appeared first on Juki Junkies.