DIXIE CUTTING TABLE

 This incredible sturdy table is there for you when you need it and can be easily put away when not in use, this table provides you with 49' of workspace and can be slimmed down to 14" when folded together.

TABLE SPECIFICATIONS

• Table Open:
  • 49” W x 37” D
  • Height Adjustable
• Table Closed:
  • 14” W x 37” D
  • Height Adjustable
• Shelf Space (x2):
  • 11 ½ ” W x 34 ½ ” D x 12 ½ ” H
• Cutting Mat C
  • 48” W x 36” D

ASSEMBLY MANUAL

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench

Do you need a place to help organize your thread spools? The thread storage cabinet is for you! Place your thread in the racks in a color-coordinated fashion, by size, by brand, or by material.

CABINET SPECIFICATIONS

• MOD 5 Thread Cabinet Dimensions (Drawers closed):
  • 38 ½ ” W x 23” D x 30” H
• Thread Spool Holders Dimensions:
  • 2” W x 16 ¾” D x 4 ¼” H
• Cone Spool Holders Dimensions:
  • 3 ⅛” W x 14 ½” D x 5 ⅜ “ H
• The entire MOD 5 Thread Caddy features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in 3 separate boxes
• MOD 5 Thread Cabinet weighs a total of 208 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• MOD 5 Thread Cabinet is available fully assembled at Arrow Dealers

ASSEMBLY MANUAL

• Phillips screwdriver with #2 head or power screwdriver
• ⅛ Drill Bit
• Level
• Clamp

• • 50 ¾” W x 17 ¼” D x 29 ½” H
• Cabinet Closed:
  • 25 ½” W x 17 ¼” D x 30 1/8” H
• Lift Opening, A10:
  • 20 15/16” W x 11 3/8” D x Adjustable Height

• Construction: Vinyl laminate/MDF/Composite
• Dual-Hydraulic Lift Weight Limit: 55 #s
• Custom Machine Insert Available for machines less than 17-1/2″ wide by 12-1/2″ deep

SEWING MACHINES THAT DO NOT FIT JUDY

• Baby Lock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Elna – 920 eXpressive
• Janome – Horizon Memory Craft 15,000 & Continental M7
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flat bed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flat bed position.

Just like her younger sister (the Gidget I), the Gidget II Table is a self-contained, fully collapsible workstation. Once she arrives, you’ll be saying goodbye to the wiggles, wobbles and general woes of other sewing tables.

But that doesn’t mean she can’t easily be stored or transported. With velcro straps to secure her steel locking legs and dual-wheel roller design, transportation to classes, retreats and even your RV is a breeze.

What’s more, an increased opening size of 23 ½” W x 12 ½” D, means the Gidget II Table is capable of supporting a 45-pound machine!

Find out more about the Gidget II table below!

Table Specifications

• Dimensions Open:
  • 40 ¼” W x 19 ¾” D x 28 ½” H
• Dimensions with Legs Folded:
  • 40 ¼” W x 19 ¾” D x 4 ½” H
• The Gidget II Table will accommodate sewing machines no larger than:
  • 23 ½” W (left to right)
  • 12 ¼” D (front to back)
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.

SHIPPING INFORMATION

COMPARE GIDGET I VS. GIDGET II

This all in one storage cube with over sixty thread holders, five shelves and two rods for hanging and storing ribbon is the ideal storage compartment your sewing room needs to help you stay organized.

CABINET DIMENSIONS

• Storage Cube Dimensions:
  • 21” W x 19 ¾” D x 29 1/4” H
• Adjustable Shelf Dimensions:
  • 9 ½” W x 8 ¼” D
• Available Finish: White
• The Storage Cube features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The Storage Cube is shipped ready to assemble in one box
• The Storage Cube ships via UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box