The front of the Kookaburra has four spacious drawers that are great for keeping your notions close at hand. These drawers pull all the way out, so you have a full view of what’s in each cabinet. Best of all, they are soft-closing, so you won’t accidentally slam them. At the back of the table are four open-facing shelves. You can adjust the height of each shelf by moving the pegs up or down, making them great for fat quarters and other notions.

Available in three finishes, the Kookaburra can match any room of your house without clashing with your decor. Each table features the same rich veneer and color throughout, making it appealing both inside and out. Made with a woodgrain melamine laminate finish, this cabinet is durable, scratch-resistant, and easy to clean. The ash white, gray, and teak color choices are neutral enough to blend in with your other furniture while still giving you options for custom-colored décor.

On both sides of the Kookaburra are side leaves that triple the width of your workspace. The table fully extended will hold the Kangaroo’s large 38″ x 70″ cutting mat (sold separately). You can fold down the side leaves to create a small table that doesn’t take up too much space when not in use. Each leaf is supported by heavy-duty casters that allow you to move your table in any direction you need.

Kangaroo’s line of specialty furniture is committed to combining comfort, utility, and convenience directly to your sewing room. The Kookaburra Cutting Table is a stunning addition on its own, but it’s also the perfect add-on to your Wallaby, Aussie, or Kangaroo & Joey sewing cabinets.

Arrow Companies, LLC. (Arrow) provides limited warranty coverage to the original purchaser of this product against defects in materials or workmanship of Arrow furniture components for ten years from the date of purchase. As used in this Warranty, “defect” means imperfections in components that substantially impair the product’s utility. It may vary from state to state.

Contact Arrow at 1-800-533-7347 or CS@ArrowCabinets.com when requesting warranty service. You must also present proof of purchase documentation, which includes the date of purchase (detailed receipt) and photos of the product. Arrow Companies, LLC will replace any defective part (at its sole option), excluding labor. Replacement parts will be warranted for only the remaining period of the original Warranty.

The post Kookaburra Cutting Table appeared first on Juki Junkies.

• Electric height control with 4 memory settings for the perfect serging or sewing height
• Height range: 28.7″ – 48.4″
• Ultra comfortable sit or stand options for serging, sewing, and cutting projects
• Compatible with custom acrylic sewing inserts to create a flush sewing surface
• Lift opening accommodates standard sewing machines and sergers on the market, up to 40lbs
• Large worksurface provides expansive sewing and crafting workspace
• Extendable left side leaf to expand worksurface by additional 9″
• Sewing lift raises to create complete flush worksurface for cutting projects, or traditional desk usage
• Sturdy design with steel legs for stability and easy mobility
• Optional heavy duty casters are available
• 5-year warranty, worry-free performance on the frame, motor and other mechanisms, and 2-year warranty for the controller and switch, and electronics

SHIPPING INFORMATION

• Arrow Sewing determines shipping carrier (FedEx or UPS)
• Sewing furniture can’t be shipped to a PO Box
• Eleanor Serger & Sewing Table will arrive in 1 boxe
• If ordered, custom acrylic sewing inserts will be shipped separately and delivered later than sewing furniture

Dimensions

• Table Dimensions (closed):
  • 43 3/8” W x 23 5/8” D
• Table Dimensions (side leaf extended)
  • 53 3/8” W x 23 5/8” D
• Height Adjustable:
  • 28.7″ to 48.4″
• Sewing Lift Opening:
  • 22 3/4” W x 10 3/8” D
• Maximum Weight Capacity (Main Table)
  • 110 lbs

ASSEMBLY INSTRUCTIONS

The post Eleanor Serger & Sewing Table appeared first on Juki Junkies.

Lift the seat cushion up to reveal a hidden storage compartment for your small notions or patterns.

Each of our chairs is designed for maximum comfort and ergonomic posture. Create your perfect height with easy height adjustment and move wherever you need with the 360-degree swivel base 5-star base to increase stability.

CHAIR SPECIFICATIONS

• Chair Dimensions:
  • Seat of Chair: 18” W x 16” D x Adjustable Height
  • Back Rest: (from top of seat) 17 ½” W x 4 ½” D x 10 ½” H
  • Storage Compartment: 15 ½” W x 13 ¼” D x 2” H
• Chair holds up to 250 pounds

SHIPPING INFORMATION

• Chair ships ready to assemble in two separate boxes
• Weighs a total of 26 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box

Assembly instructions are included with the hydraulic chair. You may also download the Hydraulic Sewing Chair assembly manual and save it to your computer.

For assembly, you’ll need:

• Requires a standard Phillips screwdriver

The post Hydraulic Sewing Chair appeared first on Juki Junkies.

CABINET SPECIFICATIONS

• MOD 5 Thread Cabinet Dimensions (Drawers closed):
  • 38 ½ ” W x 23” D x 30” H
• Thread Spool Holders Dimensions:
  • 2” W x 16 ¾” D x 4 ¼” H
• Cone Spool Holders Dimensions:
  • 3 ⅛” W x 14 ½” D x 5 ⅜ “ H
• The entire MOD 5 Thread Caddy features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in 3 separate boxes
• MOD 5 Thread Cabinet weighs a total of 208 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• MOD 5 Thread Cabinet is available fully assembled at Arrow Dealers

ASSEMBLY MANUAL

Assembly instructions are included with the cabinet. You may also download the MOD 5 Thread Cabinet manual and save it to your computer.

For assembly, you’ll need:

• Phillips screwdriver with #2 head or power screwdriver
• ⅛ Drill Bit
• Level
• Clamp

The post MOD 5 THREAD STORAGE CABINET appeared first on Juki Junkies.

CABINET SPECIFICATIONS

• Cabinet Dimensions:
  • 29 ⅝” W x 23” D x 30” H
• Drawer Dimensions (5):
  • 25 ¼” W x 16 ¼” D x 3” H
• The entire MOD 5 Drawer Caddy features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in 2 separate boxes
• The MOD 5 Drawer Caddy weighs a total of 123 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY MANUAL

Assembly instructions are included with the cabinet. You may also download the MOD 5 Drawer Caddy manual and save it to your computer.

For assembly, you’ll need:

• Phillips screwdriver with #2 head or power screwdriver
• ⅛ Drill Bit
• Level
• Clamp

The post MOD 5 DRAWER STORAGE CABINET appeared first on Juki Junkies.

CABINET SPECIFICATIONS

• Cabinet Dimensions:
  • 46 ½” W x 39” D x 30” H
    • Width is measured from back corner to right or left side
• MOD Corner Cabinet is ideal for Sewing Machines:
  • Up to 45 pounds
  • Maximum Machine Dimensions:
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14”
    • Sewing machine opening is beveled
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire MOD Corner Cabinet features tough melamine laminate, MDF, and composite wood
• Optional Custom Machine Insert for a flush surface (sold separately)

SEWING MACHINES THAT DO NOT FIT MOD CORNER CABINET

We are aware of the following sewing machines that are too large to fit into the MOD Corner Cabinet:

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

SHIPPING INFORMATION

• The Corner Cabinet is shipped ready to assemble in 2 separate boxes
• MOD Corner Cabinet weighs a total of 117 pounds
• Due to cabinet size, product shipped on a pallet via LTL
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUAL

Assembly instructions are included with the cabinet. You may also download the MOD Corner Cabinet manual and save it to your computer.

For assembly, you’ll need:

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

The post CORNER CABINET appeared first on Juki Junkies.

CABINET SPECIFICATIONS

• Cabinet Dimensions:
  • Open: 61 ¼” W x 31 ½” D x 29 ½” H
  • Closed: 48 ½” W x 31 ½” D x 29 ½” H
• Drawer (x3) Dimensions:
  • 4 ⅜” W x 12” D x 3 ½” H
• Shelf (x4) Dimensions:
  • 11 ¾” W x 7 ½” D x 6 1⁄4 ” H
• Cutting Mat Dimensions:
  • 23” W x 17” D
• Ginger Cabinet is ideal for Sewing Machines:
  • Up to 45 pounds
  • Maximum Machine Dimensions:
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Sewing machine opening is beveled
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The Ginger features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT GINGER SEWING CABINET

We are aware of the following sewing machines that are too large to fit into the Ginger Cabinet:

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

• Storage includes:
  • Five drawers located on the front left
    • Top two hold thread pegs which hold 24 thread spools each (48 total)
    • Bottom three are single compartments for other storage
  • Four shelves located on the left side

SHIPPING INFORMATION

• The cabinet is shipped LTL, ready to assemble in three separate boxes
• Ginger weighs a total of 165 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

The post GINGER CABINET appeared first on Juki Junkies.

CABINET SPECIFICATIONS

• Cabinet Dimensions Open:
  • 69 ½” W x 43 ⅜ ” D  x 30” H
• Cabinet Dimensions Closed:
  • 69 ½” W x 30” D x 30” H
• Quilt Leaf:
  • 69 ½” W x 13 ⅜” D x ¾” H
• Lift Opening:
  • 30 ⅜” W x 14 ¼” D x 16 ¾” H
• Caddy Dimensions:
  • 34 ⅜” W x 28 ⅝” D x 25 ¼” H

• Caddy Cubby:
  • 23 ⅜” W x 32” D x 28 ½” H
• Caddy Small Drawer:
  • 29 ⅝” W x 14 ⅜” D x 3 ⅜ ” H
• Caddy Large Drawer:
  • 29 ½ ” W x 15” D x 3 ¼” H

ASSEMBLY INSTRUCTIONS

Your Diva will arrive fully assembled, but please be sure to watch the following video before it arrives

The post DIVA CABINET appeared first on Juki Junkies.

TABLE SPECIFICATIONS

• Table Dimensions:
  • Legs Unfolded: 40 ¼” W x 19 ¾” D x 28 ½” H
  • Legs Folded: 40 ¼” W x 19 ¾” D x 4 ½” H
• The Heavyweight Table has an adjustable platform so it will accommodate the Singer Featherweight 221K and 222K
• No need for custom insert, 221K and 222K fit perfectly
• Construction: Melamine/MDF with Steel Legs
• Manual Platform Weight Limit: 45 lbs

Please note: This table will NOT accommodate a Singer 301

SHIPPING INFORMATION

• The Heavyweight Table arrives fully assembled in one box
• Shipped by FedEx or UPS
• Weighs a total of 37 pounds
• Cannot be shipped to a PO Box

The post HEAVYWEIGHT TABLE appeared first on Juki Junkies.

CABINET DIMENSIONS

• Storage Cube Dimensions:
  • 21” W x 19 ¾” D x 29 1/4” H
• Adjustable Shelf Dimensions:
  • 9 ½” W x 8 ¼” D
• Available Finish: White
• The Storage Cube features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The Storage Cube is shipped ready to assemble in one box
• The Storage Cube ships via UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

The post STORAGE CUBE appeared first on Juki Junkies.