This presser foot is used for sewing on nylon thread or wire for crafts.
This presser foot is used for sewing on strands of pearls, beads or sequins.
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.
Compatible with Juki TL machines and J-150 QVP. Such as:
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This table is only for the Juki TL's such as:
This Thin Fabric plate is designed specifically for sewing lightweight materials easily. It reduces puckering and prevents skipped stitches as well as faulty stitching.
Compatible with all Juki TL models. Such as:
This is for the Regular zipped foot NOT poly glide.
This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.
Series & Part Number
MO-2800: 40138099
MO-1000: 40138099
MO-735: A9820-655-0A0A
MO-114D/104D: A9820-655-0A0A
MO-655: A9820-655-0A0A
MO654DE/MO-644: A9820-655-0A0A
MO-623: A9820-655-0A0A
MO-1200QVP: A9820-655-0A0A
MO-2000QVP: 40138099
This presser foot is used for sewing on strands of pearls, beads or sequins.
Braiding to a width of up to 4 mm as well as transparent or decorative threads can be sewn on. The strand can also be sewn in the middle of fabric by sewing along a folded edge with flatlock.
Series & Part Number
MO-2800: 40138106
MO-1000: 40138106
MO-735: A9870-634-0A0A
MO-114D/104D: A9870-634-0A0A
MO-655: A9870-634-0A0A
MO654DE/MO-644: A9870-634-0A0A
MO-623: A9870-634-0A0A
MO-50e: 40131949
MO-80CB: 40131949
MO-1200QVP: A9870-634-0A0A
MO-2000QVP: 40138106
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.
The guide, being long at the front and back, makes this gauge perfect for sewing long straight lines
The gauge can be moved as far as 3/4" (20 mm) from the needle and secured by loosening and tightening the screws with a screwdriver
Compatible with Juki TL machines and J-150 QVP. Such as:
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This Thin Fabric plate is designed specifically for sewing lightweight materials easily. It reduces puckering and prevents skipped stitches as well as faulty stitching.
This throat plate prevents stitching shrinkage and keeps lightweight materials out of the needle hole. Recommended Needle size #9 to #11