Mounting Base with Sock Gauge

Embroider beautiful designs on socks and wristbands with this frame.

• Dimensions of Tubular Frame: 100mm x 100mm (4" x 4")

• Part number: TJGAUGESET

Compatible with the JUKI/Tajima Sai 8 Needle Embroidery Commercial Machine

This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. The gauge can be swung toward you so that it is out of the way when not in use.

• The guide, being short at the front and back, makes this gauge perfect for sewing gentle curves

• The gauge can be moved as far as 1.2" (30 mm) from the needle and secured by loosening and tightening the screws with a screwdriver.

Compatible with Juki TL machines and J-150 QVP. Such as:

• • Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: A9847D250A0

Sewists use this seam guide with their gauge to get an accurate seam allowance!

This presser foot is used for sewing on strands of pearls, beads or sequins.

• Braiding to a width of up to 4 mm as well as transparent or decorative threads can be sewn on. The strand can also be sewn in the middle of fabric by sewing along a folded edge with flatlock.

Series & Part Number

• MO-2800: 40138106
• MO-1000: 40138106
• MO-735: A9870-634-0A0A
• MO-114D/104D: A9870-634-0A0A
• MO-655: A9870-634-0A0A
• MO654DE/MO-644: A9870-634-0A0A
• MO-623: A9870-634-0A0A
• MO-50e: 40131949
• MO-80CB: 40131949
• MO-1200QVP: A9870-634-0A0A
• MO-2000QVP: 40138106

This box collects scraps of fabric cut by the overlock sewing machine.

• This is useful for throwing out all scraps after work is completed, without allowing them to scatter around the work area. When storing the sewing machine, accessories such as the foot controller can be stored in the box.

Series & Part Number

• MO-1000/2000: 40134096

• MO-735: A9108-130-000

• MO-114D/104D: A910-880-L000

• MO-655: A9108-202-000

• MO-654DE: A9108-202-000

• MO-644D: A9108-202-000

• MO-623: A9108-202-000

• MO-1200QVP: A910-880-L000

This presser foot is used for sewing together two pieces of fabric while creating gathers.

• Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
• Gathers can also be created in a single piece of fabric.

Series & Part Number

• MO-2800: 40138121
• MO-1000: 40138121
• MO-735: A9860-655-0A0C
• MO-114D/104D: A9860-655-0A0C
• MO-655: A9860-655-0A0C
• MO-654DE/MO-644: A9860-655-0A0C
• MO-623: A9860-655-0A0C
• MO-50e: 40131948
• MO-80CB: 40131948
• MO-1200QVP: A9860-655-0A0C
• MO-2000QVP: 40138121

This presser foot is used to sew blind hem stitching, decorative flatlock or pin-tucks.

• This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range.

• Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or with roll hem (pin-tuck) stitches.

Series & Part Number

• MO-2800: 40149058

• MO-1000: 40149058

• MO-735: A9521-634-0A0A

• MO-114D/104D: A9521-634-0A0A

• MO-655: A9521-634-0A0A

• MO654DE/MO-644: A9521-634-0A0A

• MO-623: A9521-634-0A0A

• MO-50e: 40131946

• MO-80CB: 40131946

• MO-1200QVP: A9521-634-0A0A

• MO-2000QVP: 40149058