Hoop Tech Embroidery Machine Stand, Juki/Janome

This presser foot is used to sew blind hem stitching, decorative flatlock or pin-tucks.

• This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range.

• Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or with roll hem (pin-tuck) stitches.

Series & Part Number

• MO-2800: 40149058

• MO-1000: 40149058

• MO-735: A9521-634-0A0A

• MO-114D/104D: A9521-634-0A0A

• MO-655: A9521-634-0A0A

• MO654DE/MO-644: A9521-634-0A0A

• MO-623: A9521-634-0A0A

• MO-50e: 40131946

• MO-80CB: 40131946

• MO-1200QVP: A9521-634-0A0A

• MO-2000QVP: 40149058

This presser foot is used for sewing on piping while overlocking the edge of the fabric.

• Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.

Series & Part Number

• MO-2800: 40138103
• MO-1000: 40138103
• MO-735: A9865-655-0A0A
• MO-114D/104D: A9865-655-0A0A
• MO-655: A9865-655-0A0A
• MO654DE/MO-644: A9865-655-0A0A
• MO-623: A9865-655-0A0A
• MO-50e: 40131950
• MO-80CB: 40131950
• MO-1200QVP: A9865-655-0A0A
• MO-2000QVP: 40138103

This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.

This table will fit with the following:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

• Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.

This 1/4" Quilting Presser Foot is used for free-motion quilting using a ruler.

• With a distance of 1/4" (6.5mm) from the 1/4" needle entry point to the outer edge of the presser foot, sew using a ruler as a guide. The front of the presser foot is lowered, making it easier to see the needle area.

• Use the screw to adjust the height of the presser foot according to the thickness of the fabric.

THIS IS FOR JUKI TL MODELS ONLY. Compatible with:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: 40166729